Many times, once an associate degree HP printer has a blunder, the cause is clearly shown on the monitor. However, in alternative cases, the explanation for the HP printer error could also be a whole mystery. rather than happening pursuance to seek out a precise answer for the printer error, it's higher to undertake a series of routine troubleshooting steps-initial. If these steps fail to repair the printer error, you will ask for expert help on the 123hpcomprintersetup.

Step 1

Ensure that the HP printer cables area unit is properly connected. If doubtful, shut down the printer, disconnect it and disconnect all of the printer cables. Plug it again and reconnect the cables. flip the printer back on once more to check if the error has cleared.

Step 2

Check the HP printer cartridges and print heads to confirm that they are put in properly. additionally, see if the printer cartridges area unit is empty. If the ink cartridges have adequate ink, put in the cartridges and also the print heads. If associate degree ink cartridges are empty, replace them with a brand new one.

Step 3

Make sure that the HP printer's computer code is correctly put in. If the device doesn't respond after you try and print or the printer computer code will not initialize, uninstall and put in the HP printer computer code.

Step 4

Observe if your computer's firewall is preventing the HP printer from functioning properly. Open your firewall preferences and add the printer computer code possible file (*.exe) as an associate degree exception or disable the firewall quickly to check if this fixes the error.

Step 5

Check the print settings within the HP printer computer code if the pages do not print properly. ensure that the margins area unit is set to a minimum of the minimum margins that your HP printer supports. additionally, make sure that you've got chosen the proper printer settings for the paper size and kind of document you are attempting to print. To access these printer settings a lot simpler, open the HP answer Center.

Step 6

Clean and align the printer cartridges. Open the computer code for your HP printer or the HP answer Center to access these maintenance options.

Step 7

Double-click on the HP printer icon within the system receptacle on the rock bottom right of the screen, if it seems. Look beneath "Status" within the printing queue to scan the error messages. Right-click on the entries and choose "Cancel," if necessary.

Step 8

Navigate to the 123hpcomprintersetup to go look at your specific printer model if these steps fail to repair the printer error. Click on "Support and Troubleshooting." Click "Solve a Problem" to seek out solutions for the HP Printer Setup specific error. additionally, check the "Software and Downloads" space for computer code and driver updates.