If your vehicle's braking system is not working properly and you don't pay attention to fixing it, it puts you and others at risk. If you ignore brake problems, they can soon become serious and become more expensive to repair than they were before. There are many reasons for the brake system to malfunction, which we have already mentioned in this blog, due to which the driving experience worsens and it’s become difficult to pass the MOT test Manchester. That is why we recommend that you do not delay at all in sending your vehicle to an automobile station in Manchester for Car Service. 

Can My Vehicle’s Worn Brake Pads Be A Reason for MOT Fail 

The brake pads of your vehicle are properly checked at the time of MOT testing, and if any problem is noticed which is serious then it becomes the reason for failing your MOT test.

If the brake pads of a tyre start wearing even slightly, it causes a loss of braking firmness and stability. Keep in mind that if they get worn out by more than 1.5 millimetres, they will have to be replaced. Such a situation mostly occurs with vehicles that do not undergo routine checkups. Excessively worn brake pads also start harming other components, so it is beneficial to replace them at regular intervals.

You should replace your brake pads when they have covered 50000 miles because this is the time when they are at their last stage. Along with miles, it also depends on whether you drive smoothly or sportily and how much load your vehicle carries.

Which Braking Components Are Required for Servicing? 

Whenever you send your vehicle for an MOT test or a regular car service, they usually check all the notable braking parts to find out in what condition they are and how well they can perform. Whatever parts of the vehicle's braking system are, no matter what position they are in, they are all checked by MOT examiners.

Below we have given the names of those brake parts that will be inspected: 

• Anti-Lock Braking System (ABS) 
• Brake Fluid 
• Brakes 
• Electronic Braking System (EBS) 
• Handbrake 

How Many Types of Problems Can Occur Related to the Brake System? 

These brake problems must be resolved before attending an MOT test.

When Brakes Vibrate Loudly 

When you drive a car, you still apply the brakes, how strange is it to vibrate and shake hard? If yes, then this is happening due to heavy force being applied to the brake disc. This problem also occurs when your car is not being used for a long time. This heavy vibration can also occur when the pressure pad on the brake is released when accelerating and stopping the vehicle suddenly. Even if the disc is bent or warped, there is a high chance of this happening.

Issue With Brake Pedal  

The brake system provides grip to the brake pedal, if it gets damaged or does not get enough pressure then it becomes quite dangerous. That is why examiners also declare your MOT failed due to such pedals. The pedals should have a substance that prevents slipping. 

Brake Discs Contamination or Linning Problem 

There is an issue with the lining on the brake pads which results in the brake discs suffering. The substances in the brake pads start damaging discs which causes wear and tear as the speed increases.

If the line is not showing or there is something else related to it, it may cause problems in the braking function.

Brake Fluid Leaked or Contaminated 

Brake fluid inaccuracy is classified as a fault, and if it is noticeable that the brake fluid has a leakage problem the vehicle may not pass the MOT test. If brake liquid is leaking from somewhere then it would be a very dangerous problem that should not be ignored. However, a red zone light will indicate if the brake fluid level is not at the correct level. Although these will probably not indicate an MOT failure immediately, you will be guided that the problem should be rectified without delay.

Worn or Faulty Brake Discs 

A little bit worn brake disc does not cause any problem but when worn beyond a limit it indicates major damage. Therefore, car service providers must check these. Apart from wear, if the brake discs are not as tight as they should be, this is also considered a major fault, and diagnosing these problems is very important as many dangers occur when driving with such brake discs.

Problematic ABS Light

If your vehicle has an ABS light indicating a brake problem, whether it is giving a general warning that there is a problem or not, it could be the cause of an MOT failure. A lot of problems arise due to ABS whenever you try to stop your vehicle in an emergency. This means that the anti-lock braking (ABS) light should work effectively. So, if such problems are occurring with ABS then you need to send your vehicle to any nearest and reliable auto garage for MOT Manchester.