In any industry, accurate measurements of flow rate are crucial to ensure that all the fluid control processes function efficiently. And for this, you can always opt for the best paddlewheel flow meters, like the Lorric paddlewheel flow meter. Such flow meters are designed to offer a safe, accurate as well as economical method to measure the flow. These are also called rotary wheel flow meters, impeller flow meters, etc.

Understanding the Working Principle of Paddle Wheel FlowMeters

In general, a paddlewheel flow meter has three primary components. These are the controller, the pipe fitting and a paddle wheel sensor. When the magnets located in the blades spin, the paddle wheel meter produces a frequency along with a voltage signal which will be proportional to the flow rate. As per the rule, the faster the flow of fluid, the higher the frequency will be. A paddle wheel meter can be inserted in an insertion or an in-line style. Flow controllers and displays are utilized to get the signals from the paddle wheel meter and then convert the signals into flow values or flow rates. Once done, the processed signals can be utilized to create an alarm, control the process and more. Such meters offer high-accuracy and low-cost measurement options for different flow system applications.

Accuracy of a Paddle Wheel Flow Meter

The best paddle wheel flow meter, like a Lorric Paddlewheel flowmeter, offers sufficient accuracy for different applications. The average accuracy level can range between 1.5 percent to 3 percent.

Application of A Paddlewheel Flow Meters

A paddlewheel flow meter can be used in batching or dispensation systems, chillers, cooling towers, pump protection, medical equipment, flow verification, fume scrubbers, irrigation,  filtration, reverse osmosis and more. They are widely used in the water treatment industry, chemical industry, food and beverage industry, semi-conductor industry, oil & gas industry and more.

How to Choose the Right Paddle Wheel Flow Meter?

• The flow meter should be chosen based on the fluid, such as chemical or water.
• Response time
• Flow velocity
• Make sure the material used in the device is suitable for the application.
• Check the current power consumption and operating voltage of the device.

Some Impressive Features Of Paddlewheel Flow Meter

• A good quality paddle wheel flow meter demonstrates decent anti-interference quality.
• Some devices have robust signal transmission capability. The maximum signal transmission can be 300 to 400 meters.
• You will enjoy a low failure rate and stable quality.
• Amazing price-performance ratio.
• Multiple range measurements and can be used for various applications.
• Based on your requirements, you can adjust the measurement to get accurate results.
• The device can display cumulative flow and real-time flow at the same time.
• The installation process is very easy.

However, you should keep in mind that a paddlewheel flow meter can be sensitive to foreign objects, and it requires periodic maintenance.

Conclusion

If you want to get instant alerts about the flow rate decreasing or increasing outside a pre-set range, then the Lorric paddlewheel flowmeter can be an excellent option for you. And one of the best places to buy this flow meter is Gordy's Sensors. It is perfect for the control and measurement of industrial process water pipelines, chemicals and other applications. You will get an electric pulse and a mechanical transmission output type. Visit their website, check out the available model, and press your order now.